[amsat-bb] Disable agc

[John Heath <100675.3601@xxxxxxxxxxxxxx>]

Hi Guys,

feel sure I read somewhere that if the S meter is not showing any signal
strength indication then the agc is not operating.   Its normally the agc
volts 
that drive the meter.

RF gain can be reduced to meet the above condition.

73 john g7hia
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org