[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: AIDC 3733 and other antennas?



I did...I am using it on a .25 F/D Andrew dish 4'
and a 2.5 turn helix feed...it works ok...I need a dish with a better F/D
ratio.
The feed is about 110 degree pattern and this dish needs 180.
I hear the beacon at s8 with the s meter at s0 off signal..the ssb stations
are s5 and some s6...
73,
Frank KL7FH
----- Original Message -----
From: "Floyd Sense" <sentek@sprintmail.com>
To: <amsat-bb@AMSAT.Org>
Sent: Tuesday, October 09, 2001 5:19 PM
Subject: [amsat-bb] AIDC 3733 and other antennas?


> Anyone using the AIDC 3733 downconverter with an antenna other than the
> dipole/reflector that it comes with?  If so, did you just replace the
> antenna with an "N" connector?
>
> K8AC
> Floyd Sense - Angier, NC
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home