RE: [amsat-bb] ts2000 & ao40 help

["Howard Long" <howard@xxxxxxxxxxxxxx>]

Hello Perry

I use a second downconverter (Microwave Modules) to take the IF down to
28MHz for the RX only antenna.

I know Jerry K5OE uses a Hamtronics d/c to achieve the same thing.

Works great except the gain's way to high... noise starts at S9 for me! A
couple of 10dB attenuators placed at strategic points will help here.

73 Howard G6LVB

-----Original Message-----
From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
Behalf Of Perry Yantis
Sent: 06 October 2001 13:46
To: Amsat-bb
Subject: [amsat-bb] ts2000 & ao40 help



I am interested in ideas from those satellite users with a ts-2000 set up
for Oscar 40.

I am looking at several ways to go from 2400 mhz down to either 2m or 10
meters (using the receive only port).

Perry Yantis  WB8OTH  pyantis@compuserve.com




----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org