Re: [amsat-bb] Receiver Command Software for AO-40

["John / NS1Z" <ns1z@xxxxxxxx>]

You're kidding, right? I didn't find that to be the case with mine...  Oh, I
see - hotmail. Now I get the joke

----- Original Message -----
From: ipete88 <ipete88@hotmail.com>
To: <amsat-bb@AMSAT.Org>
Sent: Thursday, October 04, 2001 8:52 PM
Subject: Re: [amsat-bb] Receiver Command Software for AO-40


> No, We gave up on using the Yaesu VR-5000 radio. It's receive is just poor
> poor poor at 2.4 GHz and it's stability is worse.
>
>
> ----- Original Message -----
> From: "Chip Margelli" <c.margelli@vxstdusa.com>
> To: <amsat-bb@AMSAT.Org>
> Sent: Thursday, October 04, 2001 1:52 PM
> Subject: [amsat-bb] Receiver Command Software for AO-40
>
>
>  > Have any of you software gurus developed a simple control program (or
>  > support within existing software) for commanding of wide-range
receivers
>  > like the VR-5000 to go to a logical downlink consistent with the
>  > corresponding uplink on a different radio? Options would include direct
>  > reception at 2.4 GHz, or reception on the converted frequency in the
VHF
>  > range. The coding for most receivers/transceivers is quite simple for
such
> a
>  > simple command; you don't need to get into a complicated cloning
protocol
> to
>  > do it.
>  >
>  > 73,
>  >
>  > Chip, K7JA
>  >
>  > ----
>  > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
>  > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>  >
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org