Re: [amsat-bb] Receiver Command Software for AO-40

["ipete88" <ipete88@xxxxxxxxxxx>]

No, We gave up on using the Yaesu VR-5000 radio. It's receive is just poor
poor poor at 2.4 GHz and it's stability is worse.


----- Original Message -----
From: "Chip Margelli" <c.margelli@vxstdusa.com>
To: <amsat-bb@AMSAT.Org>
Sent: Thursday, October 04, 2001 1:52 PM
Subject: [amsat-bb] Receiver Command Software for AO-40


 > Have any of you software gurus developed a simple control program (or
 > support within existing software) for commanding of wide-range receivers
 > like the VR-5000 to go to a logical downlink consistent with the
 > corresponding uplink on a different radio? Options would include direct
 > reception at 2.4 GHz, or reception on the converted frequency in the VHF
 > range. The coding for most receivers/transceivers is quite simple for such
a
 > simple command; you don't need to get into a complicated cloning protocol
to
 > do it.
 >
 > 73,
 >
 > Chip, K7JA
 >
 > ----
 > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
 > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
 >

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org