[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: "N" Connector Question



I have.  Use stranded wire with a lead head identical to the one use to seal
the postage stamps meter.

Glenn Little wrote:

> Bob
>
> Those are to lock wire the connector in place for critical applications.
> Keeps vibration from loosening the connector.  The chassis connector
> would be installed with fillister head screws with a similar hole in
> them. Never seen it done.
>
> 73
> Glenn
> WB4UIV
>
> -----Original Message-----
> From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org] On
> Behalf Of Bob Bruninga
> Sent: Monday, September 24, 2001 12:14 PM
> To: amsat-bb@AMSAT.Org
> Subject: [amsat-bb] "N" Connector Question
>
> OK, I give up.  what are those little pin holes around the outer lip of
> a
> quality "N"  connector?  THey are at 45 degrees and truely pin size.
>
> Been curious for years...
>
> Bob
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

--
Isidoro Hernandez
Carolina, Puerto Rico


----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home