[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: "N" Connector Question



A thought occurred to me that you didn't safety wire your PCSat connectors..
Shame shame if that's the case.....


----- Original Message -----
From: "James C. Mankin" <n5x@psu.edu>
To: "Bob Bruninga" <bruninga@usna.edu>; <amsat-bb@AMSAT.Org>
Sent: Monday, September 24, 2001 4:37 PM
Subject: Re: [amsat-bb] "N" Connector Question


> They are safety wire holes.   See for example:
> http://catalog.tycoelectronics.com/TE/docs/pdf/1/48/209841.pdf
> Presumably used in military applications to make sure the connectors
> dont unscrew themselves and fall off....
>
>
> Jim KB3KJ
>
> n5x@psu.edu
> -----Original Message-----
> From: Bob Bruninga <bruninga@usna.edu>
> To: amsat-bb@AMSAT.Org <amsat-bb@AMSAT.Org>
> Date: Monday, September 24, 2001 9:45 AM
> Subject: [amsat-bb] "N" Connector Question
>
>
> >OK, I give up.  what are those little pin holes around the outer lip of a
> >quality "N"  connector?  THey are at 45 degrees and truely pin size.
> >
> >Been curious for years...
> >
> >Bob
> >
> >
> >----
> >Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> >To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home