[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Need recommendations on 435 yagi feed



The 95 ohm cable I wasn't able to locate was the RG-133 mentioned in the
Satellite Handbook.  Someone else pointed out that RG-62 foam is rated at 95
ohms, right on the button.  It was also pointed out that a couple of ohms
won't matter, and that the normal tolerance is plus or minus 3 ohms anyway.
I did find the RG-180 elsewhere, but it was available only in 100' lengths.
Looks as if cablexperts.com will sell it by the foot.  Anyway, I think I'm
all set now and want to thank everyone for the guidance and suggestions.

K8AC
Floyd Sense - Angier, NC

----- Original Message -----
From: "Gary "Joe" Mayfield" <gary_mayfield@hotmail.com>
To: "Floyd Sense" <sentek@sprintmail.com>; <amsat-bb@AMSAT.Org>; "Douglas
Braun & Nadia Papakonstantinou" <doug@dougbraun.com>
Sent: Friday, September 14, 2001 7:27 AM
Subject: Re: [amsat-bb] Need recommendations on 435 yagi feed


> The two Ohms won't matter.  If you want to spend more money you can go to
>
> http://www.cablexperts.com
>
> Click on 75 Ohm cable.  Near the bottom of the page they have RG180/U
which
> is 95  Ohm.
>
> 73,
> Joe
> ka0yos@amsat.org
>


----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home