[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IC-910 Xmit Inhibit



Tom,

On my 910, i have cut the rx line behind the VHF coax relay, and
soldered two mini teflon coax. I installed two sma connectors to the
back panel. Using a nice sma coax relay, when n/c VHF will work.
On the n/o side of the relay i connect my down converters.
This is really foolproof, but some work, since you have to remove
the complete PA to make the connections to the underside of the
pc board...

Best 73's
Eddy ON7UN


----- Original Message -----
From: <tmwebb@ionet.net>
To: <amsat-bb@AMSAT.Org>
Sent: Monday, August 27, 2001 8:02 PM
Subject: [amsat-bb] IC-910 Xmit Inhibit


> Have any 910 owner/operators devised a way to inhibit xmit on the 144MHz
> side of the 910 to protect converters?  I know the main band (maybe it's
> the sub band) doesn't allow xmit, but the wrong switch actions can counter
> that.  I found a foolproof way with the 736 (cutting the keying line).
> Just wondered if a similar mod had been discovered for the 910.
>
> Tom Webb, WA9AFM/5
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home