Re: [amsat-bb] TH-D7A(G) & UO-22 Full Duplex Operation

[Pedro Pérez <eb4dka@xxxxxxxxxxx>]

Very nice idea! another way to work the PACSATS keyboard-to-keyboard in
realtime.
I will try it using my D7G with my satellite antenna (a 20" whip).
Hope to hear european stations using this way!

Best regards,
Pedro, EB4DKA

----- Original Message -----
From: "Ken Patterson" <kenp@etex.net>
To: <amsat-bb@AMSAT.Org>
Sent: Sunday, August 19, 2001 6:29 PM
Subject: Re: [amsat-bb] TH-D7A(G) & UO-22 Full Duplex Operation


> Hello all.
>
> Due to popular demand, I thought I would post my TH-D7A(G) to UO-22
> digipeater settings here on the SIG for all to see.
>
> I am using a laptop in terminal mode (like HyperTerminal) & the TNC
> functionality of the TNC. In other words, I am not using the APRS TNC
> function. Press the D7 TNC keyboard button twice for this function.
>
> My TNC configuration string is pretty simple.
>
> MYCALL: N5EQT-3
> HBAUD: 9600
> UNPROTO: APRSAT via UOSAT5
>
> Press the DUP key on the D7 keypad to place it in full duplex mode.
>
> All other TNC settings are the factory defaults that the D7 powers up
with.
>
> You will also need to go to (Menu) 1-4-1 & set the packet band for A:TX B:
> RX, since mode JD is up on 2M & down on 70cm.
>
> I used an uplink frequency of 145.900 & a downlink frequency of  435.120
>
> My antenna is a Cushcraft A270-6S (3 ele VHF & 3 ele UHF) antenna. A
> duplexer is not required for this antenna.
>
> That's it.
>
> Good luck with the birds.
>
> 73,
> N5EQT
>
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org