Re: [amsat-bb] UO36?

["Thomas McDaniel" <Tmcdanielsprint@xxxxxxxxxxxxx>]

Hi Ken,

UO-36 is in JD mode with 38.4Kb downlink (on 70cm) and 9.6Kb uplink (on
2mtrs).  I downloaded 650KB this morning during its 1730Z pass.  Seems to be
working ok!!  :-)

Tiungsat also operates with a 38.4Kb downlink and 9.6Kb uplink.  I got 2.2MB
on its 1950Z pass this afternoon.

I use a Symek TNC3S dual-port controller for all of my digital sat work --
it has a full duplex 9.6Kb modem in port #0 and  a full duplex 38.4Kb modem
in port #1.  In KISS mode it sends data from whichever modem is receiving to
WISP and  can be told by WISP to send from port #0.  I also have the Symek
IFD mod in my FT-736R to allow for the required wider bandwidth -- they have
these available for several different radios.  If you are interested check
out: www.symek.com

Let me know if I can answer anymore questions.  :-)

73  Tom  n0ntx
DM78pt
Colorado Springs, CO


----- Original Message -----
From: "Ken Patterson" <kenp@etex.net>
To: <amsat-bb@AMSAT.Org>
Sent: Sunday, July 29, 2001 11:45
Subject: [amsat-bb] UO36?


> Hello to all.
>
> As a novice to the Oscars, I would like to know if anyone has worked UO36
> lately? Especially Mode J?
>
> I assume Mode J  is 9600 baud FSK uplink on 2M & 9600 baud FSK downlink on
> 70cm.
>
> I have listened on most passes for the last 2 days & have not heard
> anything.
>
> Meanwhile, I have copied the downlink of UO22, (bulletins, news, etc) so I
> think my station is working ok
>
> I searched the last 100 days of amsat-bb archives & only saw comments
about
> UO36's operation in May, 2001.
>
> Thanks,
> Ken
> N5EQT
> EM22, Texas
> E-mail: kenp@etex.net
>
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org