[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Bracket wanted Primestar (Channel Master) Dish



I was in the same situation as you, I had the reflector but nothing else. I
used threaded stock to make up the feed support struts. I am still in the
process of building but this will allow me to accurately (?) adjust the feed
position for best signal (I hope!). Go to W1GHZ's website and download
HDL_ANT to get the focus point for it.


----- Original Message -----
From: Joe Leikhim <jleikhim@nettally.com>
To: <amsat-bb@AMSAT.Org>
Sent: Tuesday, July 17, 2001 1:39 AM
Subject: [amsat-bb] Bracket wanted Primestar (Channel Master) Dish


> I have a Primestar Dish (Channel Master No. 3040642-01, Mold No. 1.0M-3)
> and am looking for the pole mounting brackets for it, all I have are the
> four screws and nuts that go through the dish. Does anyone have one
> laying around they would part with cheap?  I am in Tallahassee Florida.
>
> Thanks
> --
> Joe Leikhim K4SAT
> Jleikhim@nettally.com
>
> http://www.ibiblio.org/jimmy/mcguinn/9000e.ram
>
> "tv dinner by the pool,
> i'm so glad i finished school" -F.Zappa 1967
>
> "The Revolution will NOT be televised" -Gil Scott Heron
>
> "Whats he building in there?"- Tom Waits
>
> "The large print giveth
>  and the small print taketh away..." Tom Waits.
>
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home