[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
AO40 5.6GHz uplink?
- Subject: [amsat-bb] AO40 5.6GHz uplink?
- From: "Murray Peterson VK2KGM" <vk2kgm@xxxxxxxxxxx>
- Date: Sat, 23 Jun 2001 20:21:23 +1000
Hi Graham,
These PAs sound similar to the ones supply by Mini-Kits
in Australia.
http://homepages.picknowl.com.au/vk5eme/minikits/Kits2.html
These ones are 10 watts on FM but 8 watts SSB to avoid non-linearity. They
want about $400 Australian dollars for them which is about $200 USA dollars
and a bit over 100 pounds sterling.
Regards,
Murray Peterson
VK2KGM
----- Original Message -----
From: "Graham Shirville" <g.shirville@btinternet.com>
To: "Murray Peterson VK2KGM" <vk2kgm@ihug.com.au>
Sent: Saturday, June 23, 2001 7:07 AM
Subject: Re: [amsat-bb] AO40 5.6GHz uplink?
> Hi Murray,
>
> well there has just been a note in the RSGB Microwave mag of some 10 watt
> 40dB gain PAs being available for about 100 sterling - this prompted my
> question! I am sure that this and a 60cms dish should be ok
>
> The couple of replies I have had suggested that Mode C RX has been
commanded
> on but no successful uplink reports were received. Comments about the AGC
> being telemetred at 20dB and possible descence caused by the 2.4Ghz
> transmitter.....
>
> My 2.4GHz receive is a G3JVL quad loop up the tower and a mast head 0.7dB
> preamp in a plastic water bottle just by it. Generally I can just hear the
> noise floor so it is ok ish!
>
> good luck
>
> 73s graham G3VZV
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home