[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Transystem problems



Sorry - I made a mistake in my posting - the crystal I am using is an
8.8125.

73's,

Don Woodward
KD4APP
AMSAT 33535
sales[at]sunsunsun.net
www.sunsunsun.net


----- Original Message -----
From: <Aszumski@cs.com>
To: <dbwoodw@abraxis.com>
Sent: Sunday, May 20, 2001 11:47 AM
Subject: Re: [amsat-bb] Transystem problems


I am still waiting for xtal for my transystem but I thought the freq was
8.8125 (not 8.125).  Hopefully someone can confirm

AJ

W4NM



In a message dated 5/20/01 8:25:33 AM Eastern Daylight Time,
dbwoodw@abraxis.com writes:

>
>  I've changed the crystal to 8.125 mHz from JAN to make the output come
out
>  at 144 mHz.
>
>  As a test, on my Yaesu 726 with 2m/70cm/6m modules (and satellite module)
I
>  put the RX on 144.0 mHz and TX on 50.1 mHz and could not hear or see any
>  signal - I did put my frequency counter antenna near the crystal with the
>  side cover removed from the trans system and counter read 8.125 mHz.
>
>  Any ideas?


----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home