[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IT/KCT setup



Here is the BATCH file I use to run IT, ITUNE,and DISPANG with KCT and 5500
under Windows:

cd\
set instanttrack=c:\it
set path=c:\;c:\it;c:\kct;c:\windows\command
set tz=est5edt
cd kct
C:\KCT\drv.COM/local=-5/flip=0/tt=0/ma=0/ew=05/aw=2/es=0/as=0/iaa=0
C:\KCT\osc.COM/HOT=$18
cd\
cd it
dispang
orbitdrv
itunetsr
c:\it\it.exe

I don't use autoexec.bat or config.sys. I have a shortcut to this batch file
on my desktop.
Kansas City Tracker files are in c:\kct
InstantTrack files are in c:\it along with Itune and Dispang.
The manual says when using the 5400/5600 rotor controller to remove diodes
CR5, CR6, CR7, and CR9 to keep the rotor controller from thinking the PC is
telling it to move even when the PC is turned off. I use the 5500 and
removed them. They are to clamp relays if used.


----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home