[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: AO-40 Test 05/08 (long)



Just beware that if you are using power on the coax, this approach will not
work.

Pieter

----- Original Message -----
From: "KB7WW Art Moe" <kb7ww@uswest.net>
To: "Mark L. Hammond" <hammond@surrealnet.net>
Cc: <Mike73@aol.com>; <>; <danj@marvin.com>
Sent: Wednesday, May 09, 2001 20:00
Subject: Re: [amsat-bb] AO-40 Test 05/08 (long)


> You might try a TV 1 in 2 out spliter. Not the best match but should work.
Or
> if you have a 2 port power divider for 2 meters that should work better.
>
> Art
> KB7WW
>
> "Mark L. Hammond" wrote:
> >
> > Hi Mike,
> >
> > Question--how did you split the 2M IF signal out of the converter?  Was
it
> > as simple as a "Y" or "T" type of coax splitter??  One into each rig?
> >
> > I'm quit curious, since I was wanting to the same thing, but never
imagined
> > it would nearly as successful as you describe.  It's great news!  And
much
> > simpler than using 2 antennas and 2 converters ;-)
> >
> > 73,
> >
> > Mark
> >
> > At 07:51 AM 5/9/2001, Mike73@aol.com wrote:
> > >I got into the shack at 1004 UTC MA 138 Tues morning. The night before,
I had
> > >hooked 2 separate 2M IF rigs on the output of my S band downconverter.
The
> > >idea was to copy/display telemetry while working the transponder. I
> > >specifically wanted to monitor the U & L1 receiver AGC levels. AO-40's
range
> > >//73,
> > >Mike, N1JEZ
> >
> > Mark L. Hammond  [N8MH]
> >
> > ----
> > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home