[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: PC Interface for G-5400G Update



Hello PAUL, did you check www.ea4tx.com  ??
73 Jacques F6BKI
----- Original Message -----
From: "Paul Willmott" <pwillmott@northrock.bm>
To: <amsat-bb@AMSAT.Org>
Sent: Tuesday, April 10, 2001 12:56 AM
Subject: [amsat-bb] PC Interface for G-5400G Update


> Many thanks to all who have responded to by quest!
>
> well so far no solutions, ....
>
> ... the only COTS solution so far is the Yaesu box, which is expensive. I
> was hoping for an amateur solution that didn't involve getting the
soldering
> iron out.
>
> ... for those who missed my original post, I'm looking for an RS-232
> controlled interface between my PC and G-5400 rotor controller, ... I've
> been using a KCT for years but my new PC don't have an ISA slot.
>
> ... I don't want to use a parallel port device because it is hell to write
a
> driver driver for Windows NT, and no I don't want to swap to Linux as the
> author of my fav tracking program won't allow it (Me).
>
> ... to be honest I need a simple device that you say go to Az180 and it
> goes, ... it would be nice to query it and ask it where it thinks it is
> pointing, ... but that's just optional....
>
> ... a simple EasyComm 2 device would be great, ... I just don't want to
have
> to build it.
>
> Any more ideas!
>
> Cheers
> Paul, VP9MU
>
> -----------------------------------------------------------------------
>
> Paul C. L. Willmott, VP9MU, G6KCV
> AO-40 Telemetry Archive
>
> Please zip and send all telemetry you capture from AO-40 to :
> ao40-archive@amsat.org
>
> -----------------------------------------------------------------------
>
>
>
>
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home