Re: [amsat-bb] Grid Square working

[Peter Hodgson <va3pkh@xxxxxx>]

Hi James
There was quite a discussion on this last summer.
I have cards from WB0TSX on UO14 and AO27 from EN01,EN 02 , EN 10
& EN11 all on two QSO's (one from each sat) . If you have verification of
the location by either a survey marker, or GPS this is satisfactory and you
do not have to "hop" a few feet to each square.
I am sure you will probably receive a link to the official ruling, but this
is what I can remember.
Hope they are not the same squares , I would like to do it again. :-)
73
Peter
VA3PKH

James Clay French KD4DLA wrote:

> Sunday night on the local AMSAT net, I had a station asking about doing
> what I am going to call a Grid Square DXpedition in a couple of states
> this summer.
>
> He was wondering about one thing though.
>
> He has a spot were he can stand in one spot and be in four Grid squares
> at the same time. Would he have to move a few feet into each grid square
> to make it official or could he stay in the same spot and make contacts?
>
> Any help would be appreciated.
>
> --
> James KD4DLA
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org