[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: wisp



Nick:

I wrote some fixes into WispDDE to handle the FT-100 as one side of the link
(uplink or downlink, not both) with Wisp. The CAT interface on the FT-100 is
rather limited and makes automatic full duplex tuning rather difficult. You
could hack my sources and make it so that the SPLIT function is not turned
off, and simply rely on the fact that the 2m uplink probably doesn't need
doppler correction anyway.

http://www.g6lvb.com/wispdde_info.htm

73 Howard G6LVB

-----Original Message-----
From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
Behalf Of Nick Pugh
Sent: 03 March 2001 03:50
To: amsat-bb@AMSAT.Org
Cc: w0sl@AMSAT.Org
Subject: [amsat-bb] wisp



I would like to control the douppler shift on my ft 100. I would like to get
the douppler out of wisap via dde.  can you give a pointer on how to do that

thanks in advance
nick k5qxj

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home