[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Source for F to N/SO239 Adapters

In the past, I have experienced BNC connectors coming undone on the tower. I
have attributed this to the constant flexing when the antenna is tracking.
Have others seen this? My solution was to use 3M electrical tape but I
wonder if what I saw was normal??

----- Original Message -----
From: Douglas Cole <n7bfs@qwest.net>

> I did not make any qualifications as to whether using a bnc on the
> output was because of a desire for matching or loss or any of the stuff
> mentioned in this ongoing thread , I basically have a slew of bnc male
> connectors in my parts bin , and I tend to prefer them and like making
> cables with them , and since I don't have any F connectors , I felt it
> silly to start using them when it was so easy to replace the one on the
> Drake converter , and like others have said , I was not at all concerned
> with loss as I knew that there should be more than enough signal to make
> it down whatever type of coax I decide to use ........

Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org