[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Re: Drake 2880 power



I went to RS and found two inline preamp power supplies
that might work.  One is rated at 18V @ 50 ma.
The other is rated at 12V @ 200 ma..

Was wondering, will either one of these or both work?
The 18V one is $30 and the 12V is $25.  I forgot what
the original PS was rated at.

de Bill, N4DH

At 10:57 1/30/01 +0900, Yoshihiro Imaishi wrote:
>Hello This is Yoshi.
>
>At 2001/01/30 03:40:04 John P. Toscano wrote:
> >                    DC Blocking Capacitor
> >                            ||
> >                            \/
> >
> > IF Radio ====[coax]========)(========*=========[coax]==== Drake 2880
> >                                      |
> >                            C1        (
> >                                       )  <== RF Blocking Inductor
> >                                      (       (Sorry, couldn't figure
> >                                   L1  )      a better way to draw it)
> >                                      (
> >                                      |
> >                                     )|(  C2 - Feedthrough Capacitor
> >                                      |
> >                                +VDC Power Feed
> >
><snip>
> > Sorry, I have no idea on the appropriate values of the components.
>
>   This is in my case.
>
>http://plaza16.mbn.or.jp/~palau/images/mode-s-conv01.jpg
>   ( C1:0.01uF Ceramic, L1:0.3mm-Wire 4mm-Dim 15-turn. No C2. )
>
>   After this, I covered all of this circuit with alminum-Foil
>for shield.
>
>73 de Yoshi JF6BCC/KH2GR
>
>Yoshihiro Imaishi JF6BCC/KH2GR
>mailto:jf6bcc@jarl.com
>----
>Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home