[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: The Station Program



The 847 was implemented in Station prior to the Yaesu firmware upgrade. The
first 847 radios worked in 736 emulation mode, .. i.e. no reading of freq
from radio, ... if you look in the manual under 736R it will explain how to
work the rig.

.... and no I can't fix Station to work properly with the new 847 as the
source code was lost several years ago, ... that is why it is now a free
program, ... no more updates until version 2 (a complete re-write).

Paul, VP9MU
----- Original Message -----
From: "Brett Dawson" <brettdawson@primus.com.au>
To: <amsat-bb@AMSAT.Org>
Sent: Sunday, January 28, 2001 01:52
Subject: [amsat-bb] The Station Program


> All,
>
> I have begun using 'Station' recently for controlling my radio (FT847),
but
> have found that the 'tune' function doesn't seem to work as described in
the
> manual.
>
> My understanding from the manual is that if the 'Tune' button is pressed,
> the radio can be manually tuned.  Once the frequency has been selected,
the
> 'Tune' button is pressed again, and the program uses the manually tuned
> frequency as a starting point and applies Doppler correction to this.
>
> I cannot seem to get 'Station'  to work this way.
>
> Any ideas ?
>
> Thanks in advance,
>
> Regards
>
> Brett, VK2CBD
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home