Re: [amsat-bb] IC-821 CIV commands

["ka6tya" <ka6tya@xxxxxxxxxxxxx>]

What is the preferred software to use with the Icom 821?


----- Original Message ----- 
From: "Anthony Monteiro" <aa2tx@postoffice.worldnet.att.net>
To: "Douglas Braun & Nadia Papakonstantinou" <dougnad@BellAtlantic.net>
Cc: <amsat-bb@amsat.org>
Sent: Thursday, December 14, 2000 5:54 PM
Subject: Re: [amsat-bb] IC-821 CIV commands


> At 11:33 PM 12/13/00 -0500, you wrote:
> >Hello,
> >
> >A couple of years ago I wrote some computer software to
> >control my IC-821 radio via its CIV interface.
> >
> >At the time, I was not aware of any command that would switch
> >the radio in and out of the satellite modes.  This seemed
> >like a glaring omission on Icom's part.
> >
> >Does anyone know if this is really true, or if maybe there is
> >an undocumented command that does this?
> >
> 
> Hi Doug,
> For SAT MODE with + tracking (noninverting) use opocde = 0x12
> For SAT MODE with - tracking (inverting) use opcode = 0x11
> To cancel, use opcode = 0x10
> 
> 73,
> Tony
> 
> Tony AA2TX@amsat.org
> North Andover, MA
> 
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> 
> 

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org