Re: [amsat-bb] Phase

[Bill Hurlock <bill@xxxxxxxxxxx>]

Tried all that you suggested and still no squint angle shows. I m doing this while
AO-40 is in view. I m running 2.1j build 13

Mike73@aol.com wrote:

> In a message dated 12/4/2000 8:43:47 AM Eastern Standard Time,
> jpixton@shentel.net writes:
>
> > I see some of you are getting a display of Phase using Nova for Windows. I
> >  just poked into all the menus and can not see how to get such a display. It
> >  used to be there in Dos Nova but I can not find it.  How are you getting
> >  Phase to display. Do I have to creat a Schedule for AO-40 and then it will
> >  display???? Or what????
>
> Jerry,
>
> First go in to Setup | Satellites
> Select AO-40
> Set Alon - Alat.
>
> It's currently -9/260 but because the high gains are on the opposite side of
> where they were on AO-13, you need to reverse the settings. Stacey, W4SM had
> a post on this recently.
>
> So, set Alon - Alat to +9/80
>
> Next go to Schedule and make sure MA 1 to MA 255 is set.
> Also click "AO-13/P3D squint.
>
> Don't forget to go to Configure View | Format Text
> and click squint angle.
>
> Save your setting and life should be good......
>
> 73,
> Mike, N1JEZ
> AMSAT #29649
> Local Area Coordinator
> "A closed mouth gathers no feet."
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org