[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: PSK1 configuration



Make sure you DO NOT have any "Flow control" ON.    This means DTR/DSR,
RTS/CTS, XON/FOFF - should be OFF or not in use in your terminal program.
At least that is what worked for me.

Tim
----- Original Message -----
From: "GPersons" <railfan@flash.net>
To: <amsat-bb@AMSAT.Org>
Sent: Wednesday, November 22, 2000 11:14 PM
Subject: [amsat-bb] PSK1 configuration


> HI Group,
> Well, here I am in the long line of satellite ops that can't figure out
how
> to configure the PSK 1. <g> Mine is version 2.01. I hook it up to my
> computer using the Apple cable that came with it. It has the correct
> connector on the PSK 1 end and a db 25 female on the other. In order to
> connect the PSK 1 to my computer, I have to use a db25 to db9 reducer with
> a gender bender on the db9 side. I open Hyperterminal and turn on the
modem
> and get the welcome screen and the message to use control c to access the
> configuration screens. When I press control c, I get nothing. I have
played
> with the port settings and still no response from the computer to the
modem.
> Any suggestions?
>
> 73
>
> Gary
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home