Re: [amsat-bb] help with p3t.exe

["Joel B. Black" <jbblack@xxxxxxxxxxxxxx>]

Copying here using PSK-1 at 9600 baud to PC.  I did find that I had to go
into the registry and "massage" 9600 into the parameters.  It wouldn't save
it in setup.  I've been running all day today only stopping once or twice.
Currently, I have 1602 on my logging count - I don't know if that's blocks,
packets, or what.  On setup, I have selected COM1, 512 byte modem, and
TCP/IP Boot to "server."  I don't know if the TCP/IP matters, but mine
didn't want to copy without it.  You can also check your modem-to-PC comms
by using Hyperterminal.  Also, make sure your *port* is set to 9600 (or
whatever baud rate you choose), 8N1, and hardware handshaking (actually, it
*may* work Xon/Xoff, but I haven't tried it).  Also, using Hyperterminal,
you should be able to copy raw telemetry from AO-40.  I was doing that
yesterday until I got P3T working.  Oh yeah, make sure you have something
other than "OFF" checked in the TEXT group or you won't get anything;
however, someone mentions seeing the count increment, so, I would surmise
that you've already done that.

GL,
Joel, K2SAT

----- Original Message -----
From: TS <thomsmith@infoave.net>
To: Peter Rogers <progers@lightspeed.ca>; <amsat-bb@AMSAT.Org>
Sent: Sunday, November 19, 2000 2:29 PM
Subject: Re: [amsat-bb] help with p3t.exe


> Hi Peter,
>
> I can't get anything at 9600 with the PSK-1. Only 1200 is stable.
>
> Tommy
> KK4XZ
>
> At 10:08 AM 11/19/00 -0800, you wrote:
> > Hi comment here, I have mine running at 9600, tried it at 1200
> >seems to work just the same so switched back to 9600, it's running right
now
> >in Block D and it's not updating the screens.
> >
> > I found also that I can tune the BAR anywhere in the window and
> >it still decodes.
> >
> >Setup is FT 736 R  -  M² yagis  -  DSP 2232  - ARR 144G preamp, signal
> >strength S - 9.
> >
> >Peter.
> >
> >snip
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org