[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: help with p3t.exe



Hi Tommy

Interesting about 1200. I have been using 9600 with some degree of success.

Are you using 512 byte or 514 with CRC?

How reliable is it - My P3T seems to start OK but then nothing after five
minutes or so. Have to restart.

73 Howard G6LVB

----- Original Message -----
From: "TS" <thomsmith@infoave.net>
To: <amsat-bb@AMSAT.Org>
Cc: "Nick Pugh" <quadpugh@bellsouth.net>
Sent: Sunday, November 19, 2000 1:42 PM
Subject: Re: [amsat-bb] help with p3t.exe


> Hi Nick,
>
> I had the samne problem until I changed the PSK-1 RS232 output to 1200
> baud. Strangely, that's the only rate I can get it to work.
>
> Tommy
> KK4XZ
>
>  thats the only At 11:08 AM 11/18/00 -0600, you wrote:
> >Hi
> >I am running the patcom psk-1 modem and I am getting what looks like good
> >data out of the modem  but when I run p3t.exe the byte count go  up but I
> >never get the crc to come up ok
> >
> >I have set the set up window to com 1 baud rate to 9600 bite count to 512
it
> >like i am not decoding any data.
> >
> >
> >thanks in advance
> >nick k5qxj
> >
> >----
> >Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> >To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home