[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: P3T w/DSP-2232

Interesting observation, Gilbert.
Maybe this is why the CRC is not correct.
Anyone who knows more about this stuff than me have any thoughts?
And if this is right, any way to get around it?
Thanks in advance to one and all who respond!
Peace and 73,

----- Original Message -----
From: "Gilbert Mackall" <gilbert@mackall.nasdsl.com>
To: "Stephen M. King" <frastephen@home.com>
Cc: <amsat-bb@AMSAT.Org>
Sent: Saturday, November 18, 2000 10:52 PM
Subject: Re: [amsat-bb] P3T w/DSP-2232

> I am seeing something along the same lines. I am beginning to think
> that this is a block alignment problem. If your TNC is in the middle
> of decoding a frame and has say transmitted half of a block before
> before you get your decode program running. How does your decode
> program know that it is receiving data from the middle of a block and
> not the beginning? Once this out of sync condition happens, how does
> the program get back in sync.
> I use the G3RUH modem, it sets the CTS line high when a block is
> being sent to the terminal. Does the application clear its buffers
> when the line goes low to make sure it stays in sync?
> At 9:15 PM -0500 11/18/00, Stephen M. King wrote:
> >Is anyone using an AEA DSP-2232 with P3T to display AO-40 telemetry?
> >I am capturing packets but it seems the CRCC is invalid for most of them
> >much of the data will not display properly even if the raw data looks
> >(although many bytes are in inverse display mode).  When I capture the
> >K,L,M,N packets -- even the ones that seem to display an accurate message
> >(but again totally in inverse display) -- when I click for those messages
> >display they do not display.
> >
> >Are there some options/commands I should be setting in the DSP-2232
before I
> >start P3T?
> >
> >Any help would be greatly appreciated.
> >
> >Peace and 73,
> >Stephen
> >KD3OG
> >
> >P.S.  What a great signal on 2m!  I am using a vertical and a preamp and
> >getting usable (maybe, see above) signals even at apogee!
> >
> >----
> >Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> >To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> Gilbert Mackall

Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org