[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: P3T w/DSP-2232



Set tbaud to 1200, opmode to dsp and modem to 44. The DSP-2232 only provides
512 bytes of data so you need to configure P3T appropriately.

73,

John
KD6OZH

----- Original Message -----
From: "Stephen M. King" <frastephen@home.com>
To: <amsat-bb@AMSAT.Org>
Sent: Sunday, 19 November 2000 02:15 UTC
Subject: [amsat-bb] P3T w/DSP-2232


> Is anyone using an AEA DSP-2232 with P3T to display AO-40 telemetry?
> I am capturing packets but it seems the CRCC is invalid for most of them
and
> much of the data will not display properly even if the raw data looks
proper
> (although many bytes are in inverse display mode).  When I capture the
> K,L,M,N packets -- even the ones that seem to display an accurate message
> (but again totally in inverse display) -- when I click for those messages
to
> display they do not display.
>
> Are there some options/commands I should be setting in the DSP-2232 before
I
> start P3T?
>
> Any help would be greatly appreciated.
>
> Peace and 73,
> Stephen
> KD3OG
>
> P.S.  What a great signal on 2m!  I am using a vertical and a preamp and
am
> getting usable (maybe, see above) signals even at apogee!
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home