[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Successfully tested P3t with DSP-12

At 03:39 PM 11/14/2000 +0000, you wrote:

>1. Problem: P3t seems only to work with 2400 baud !? I was not able to
>    switch the baudrate.

If you change the baud rate, you must save the new rate, then open and 
close the serial "connection" by clicking "Off" then "Raw" again in the 
main window.  Or alternately, close and restart the program.

If you have a connection "open" at the time, and change the baud rate, the 
change won't take place until you close the connection and "reopen".  It 
wasn't anticipated that baud rate would be changed very often .. and not 
"on the fly"!

Try it... it works.

Stacey E. Mills, M.D.  WEB:  http://www.people.virginia.edu/~sem2r/
Charlottesville, VA    E-Mail: sem2r@virginia.edu or w4sm@cstone.net
                         Office Phone: 804-982-4406  Fax: 804-924-8767

Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org