[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Drake 2.4ghz convertor



This information on the IF of the converter would be most 
valuable to a lot of us if we could get something like a 
schematic.  Cliff K7RR

K5OE@aol.com wrote:
> 
> Bill,
> You are likely not the only person to need this information over the next few months.  It would be nice if you could share the "fix" with the BB.  For those installing these, you might want to consider using an RF-sensed relay, like the Ramsey RFC-1 (http://www.ramseyelectronics.com) to switch the Drake in and out.  Use the same power you run for the Drake to power the relay and buy a little protection.  They cost $14.95 for the kit.
> 73,
> Jerry, K5OE
> 
> << Anyone have a schmatic of the IF section of the Drake MDDS convertor. I
> dumped 20watts into mine the other day and need to get it running again.
> 
> Bill WA2TQI
> 
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home