Re: [amsat-bb] Symek TNC3S and WISP

[Roy Welch <rdwelch@xxxxxxxxxx>]

There isn't a default as such.  I just set the serial port speed one speed
faster than the data rate on the satellite.  If the satellite is sending
9600, I set the serial port at 19200 as a minumum, etc.

"Mark L. Hammond" wrote:
> 
> I suspect baud rate setting, as well.
> 
> What is default for the TNC3 units?  Wisp is what--19200?
> 
> 73,
> 
> Mark
> 
> At 11:41 AM 10/3/00 +0000, Roy Welch wrote:
> >Set WiSP for a TNC-2.  What else do you need?  Works fine here.
> >
> >jim wrote:
> > >
> > > I'm trying to use WISP with my TNC3S TNC from Symek using both 1200 and
> > 9600
> > > baud modems. I've not been succesful in getting WISP to talk to this
> > TNC and
> > > there are no options for it in the TNC configuration.
> > >
> > > Any thoughts on how to get this puppy to play with WISP? Or should I be
> > > using a different program?
> > >
> > > Thanks
> > >
> > > Jim
> > > KD7GND
> > >
> > > ----
> > > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> > > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
> >--
> >73, Roy
> >
> >Internet: w0sl@amsat.org
> >Home Page: http://home.swbell.net/rdwelch
> >----
> >Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> >To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> 
> Mark L. Hammond  [N8MH]

-- 
73, Roy

Internet: w0sl@amsat.org
Home Page: http://home.swbell.net/rdwelch
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org