[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: FT847 and Bencher Paddle Problem



Your gonna kick yourself for this one!

I did the same!

Press the proc/keyer button on front left - make sure its on!

I had the same problem until I realised you need to switch it on!

Simon GM4PLM


----- Original Message -----
From: David M. Tipton, PhD <tiptond@psi.com>
To: <amsat-bb@AMSAT.Org>
Sent: 30 September 2000 16:57
Subject: [amsat-bb] FT847 and Bencher Paddle Problem


> I have a 1/4" Stereo plug that I wired up to my Bencher paddles and
plugged
> into the back of my 847.  Dit's work fine.  Dahs don't.  When I squeeze
> both paddles, both dits and dahs come out.  I checked and even tried
> reversing the ground and dah wires, but it didn't solve the issue.
Anybody
> got any ideas on what's causing this?
>
> Dave
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home