Fw: [amsat-bb] Program VX-5

["KG6BRU" <kg6bru@xxxxxxxxxxx>]

----- Original Message -----
From: KG6BRU <kg6bru@hotmail.com>
To: Ross, Robert J <rjross@cbs.com>
Sent: Wednesday, August 30, 2000 11:09 PM
Subject: Re: [amsat-bb] Program VX-5


> Storing Independant Transmit Frequencies
>
> 1.    Store the receive frequency using the method already described under
> MEMORY STORAGE(it doesn't matter if a repeater offset is active.)
>
> 2.    Turn to the desired transmit frequency, then press and hold the
[F/W]
> key for one second.
>
> 3.    With in five seconds of releasing the [F/W] key, rotate the DIAL to
> select the same memory channel number as used in step 1. above.
>
> 4.    Press and hold the PTT switch then press the [F/W] key once more
> momentarily (this does not key the transmitter).
>
> note:    Whenever you recall a memory which contains independently-stored
> transmit and recieve frequencies, the [+][-] indication will appear in the
> display.
>
> Rob Mamayek    KG6BRU
> ----- Original Message -----
> From: Ross, Robert J <rjross@cbs.com>
> To: <amsat-bb@AMSAT.Org>
> Sent: Monday, August 28, 2000 4:26 AM
> Subject: [amsat-bb] Program VX-5
>
>
> > Hi All,
> >
> > I'm on vacation this week with no manual for my Yaesu Vx-5 - Does anyone
> > know how two save the cross band frequencies in to a single memory
> location.
> > (for UO-14.  I have the freq's.)
> >
> > Thanks Bob
> > n2oml
> > ----
> > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
>
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org