[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: Hard keying a amp with Kenwood TS-711A
At 09:16 PM 8/14/2000 -0500, Reid Bristor, Sr. Consultant wrote:
>The 13-pin din will do most everything you need except the PTT. You usually
>have to acquire the PTT from the mike connector on the front.
Pin 13 of the DIN is the same signal as Pin 2 on the mic connector,
according to the schematic in the service manual.
73 -Paul
kb5mu@amsat.org
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home