[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Wispdde, winorbit and FT847



Jouke,
	This is an error in WiSPDDE that I have to work on.
	WiSPDDE 3.0 uses the raw frequencies given by Winorbit without taking into
account the doppler correction that the same Winorbit provides.

	73 de Nando, CX6DD

At 11:56 p.m. 28/07/00 +0200, Jouke van de Merwe wrote:
>Hello Sat ops,
>
>I have tried to use Winorbit with Wispdde V3.0 for prediction purposes and
>to control my FT847 for doppler correction.  Wispdde and Winorbit
>communicate with each other.  The rotor parameters are changing conform the
>winorbit rotor parameters and the radio uplink and downlink frequenties show
>the initial frequenties as configured in Winorbit for the sattelite.  Also
>my FT847 is set tot the intial frequenties in the SAT mode. However the
>radio frequencies will not change.  No doppler corrections are made and if I
>change the freqency on the radio te intial frequenties come back after the
>query interval.  Do I have done something wrong or is this not possible with
>these programs.
>
>Greetings,
>Jouke van de Merwe PE1REW
>
>----
>Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
>
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home