Re: Subject: [amsat-bb] APRS Tiny-Web-Page Examples

["Joel B. Black" <jbblack@xxxxxxxxxxxxxx>]

I thought Fernando Mederos, CX6DD, had solicited information about the
Kenwood rigs for his WiSPDDE application.  Nando, am I recalling this
correctly?

73,
Joel, K2SAT

----- Original Message -----
From: Bob Bruninga <bruninga@nadn.navy.mil>
To: John Hansen <john@hansen.net>
Cc: <amsat-bb@AMSAT.Org>
Sent: Monday, June 12, 2000 9:07 AM
Subject: Re: Subject: [amsat-bb] APRS Tiny-Web-Page Examples


> On Sun, 11 Jun 2000, John Hansen wrote:
>
> >  >Does it do cross band/full duplex packet?
> >
> > Yes and yes....  The two questions that remain are whether the filters
> > are wide enough ... and whether the 5 kHz steps are adequate to tune the
> > radios for high speed digital  satellite downlinks.
>
> I think so.  My months of monitoring the downlink (for APRS) implies to me
> that 5 KHz is adequate because I can appear to copy just fine between two
> steps for a few minteus.  But the problem is that no one has written a
> driver for WISP to control the radio, so no one has gotten around to
> running automated passes to see what happens.
>
> ALso, since the KISS interface and radio control are the same serial port,
> I assume there will be some packets lost during the  interrupt to tune the
> radio.  Presumably this will only be a few packets lost...  Or maybe it
> will buffer them up in the TNC?
>
> More good questions...?
>
> de WB4APR, Bob
>
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org