[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: wisp and kan 9612 help



MSPE TNC Startup.txt and MSPE TNC Exit.txt.  Put one command on each line.
No Send.

ke6qis@juno.com wrote:
> 
>  hi guys. i am setting up a kantronics 9612 for wisp/ normal use
> and i found out that the 1200 baud port gets shut down after wisp
> is through.
>  i finnaly figured out which commands to send to the tnc to fix it
> but i have to do it ech time.
>  i cant remember the format for the start up and shut down mspe
> text files and there right names.
>  any body remember them i.e. shutdown or shut down or exit.txt
> and if there is a send in front of the command like there is with
> winpack.
>  e-mail me back if you do. thanks alan.
> 
> nnnnn
> Alan Bethel KE6QIS
> Stensat Control Op.
> Grid CN70vs
> E-mail ke6qis@juno.com
> 
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

-- 
73, Roy

Internet: w0sl@amsat.org
Home Page: http://home.swbell.net/rdwelch
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home