[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: Re: Symek IFD Board Installation
- Subject: Re: Re: [amsat-bb] Symek IFD Board Installation
- From: "PAT McGRATH" <patricio@xxxxxxxxxxxx>
- Date: Thu, 30 Mar 2000 14:17:52 -0800
Any satellite presently transmitting 38k?
If so which sat and what frequency?
----- Original Message -----
From: "John Melton - Sun UK - ENS" <John.Melton@uk.sun.com>
To: <jbblack@mindspring.com>
Cc: <amsat-bb@AMSAT.Org>
Sent: Thursday, March 30, 2000 8:04 AM
Subject: Re: Re: [amsat-bb] Symek IFD Board Installation
>
> Joel,
>
>
> > Thanks for the reply, John. I now have a question regarding your IFD
> installation. Are all of your connections (i.e. RF-OUT, RF-IN, and
DATA-OUT)
> connected to the outside pins of the IFD board?
> >
>
> I cannot remember which way round they are. I will check when I get home
> tonight.
>
> > Second, in the instructions, I thought it said not to connect the GND
> connection as the IFD board was grounded with the shields connected to GND
on
> the 70cm RF board (the mixer and filter connections). I don't see how
this
> works. To me, this is isolating the IFD from GND. Shouldn't the GND
connection
> be "made up" somewhere?
> >
>
> Did you not connect the outer shield of the ptfe coax to ground
connections at
> each end? The remark in the instructions about not needing to connect to
ground
> was for the power connections as the ground connection is provided by the
outer
> shield of the coax.
>
>
> Let me know if that was the problem, or am I just reading too much into
what
> you have said.
>
> P.S. My Icom-821 complete with CT-17 RS-232 interface and IFD board is
for sale
> ;-)
>
> -- John Melton n6lyt/g0orx
>
> Principal Systems Software Engineer
> (( Sun Microsystems,
> (|~~| Flour Daniel Centre East, Riverside Way
> `--' Camberley, Surrey GU15 3YL England
> JAVA Phone: +44 1276 416297 (internal ext 16297)
> Email: john.melton@uk.sun.com
>
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home