[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: PSK1 + IC820H connections



As I recall the Icom 820H required a modification to work satellites
at 9600 bps because when switched to 9600 operation the receive signal
was only available to the main band and the main band was required
for transmit. The mod is available from Icom and consists of tapping
a pin of an IC and running a wire to the back panel or interface of
your choice. You might want to check your rig for this mod before
attempting 9k6 satellite contacts.

73
Duane Naugle
ko6bt@amsat.org

-----Original Message-----
From: Paul Carr [mailto:paulcarr@barrow.com]
Sent: Sunday, March 19, 2000 2:29 AM
To: amsat-bb
Subject: [amsat-bb] PSK1 + IC820H connections


I am having trouble getting my PacComm PSK-1/TNC96NB combo interfaced
with my Icom 820H.  I would appreciate hearing from anyone who
successfully accomplished this.  The cable pin out/configuration along
with any other tips/hints/ideas would be appreciated.

Thanks.

Paul Carr
NL7IW
Grid BQ11
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home