Re: [amsat-bb] Help... down to the last two cables.

["Howard Long" <howard@xxxxxxxxxxxxxx>]

Jim,

I knew you were going to ask me that! I tried for about 1/2 hour to make
something that would work in ASCII characters but gave up.

So instead, check out http://www.btinternet.com/~hlong

Regards, Howard

----- Original Message -----
From: Walls, Jim R <WALLSJR@sce.com>
To: 'Howard Long' <howard@howardlong.com>
Sent: Friday, March 10, 2000 6:18 PM
Subject: RE: [amsat-bb] Help... down to the last two cables.


 > Could you tell me how you do Hor, Vert, LHCP, RHCP with your X config.  I
 > have the ARRL books, but not the RSGB (except some microwave ones)
handbook.
 > Either describe it in some detail or if you don't mind the international
 > phone call, FAX to my US FAX machine at +626-302-9999.
 >
 > Thanks & 73
 > ------------------------
 > Jim Walls - K6CCC
 > k6ccc@amsat.org
 > Ofc:  626-302-8515   FAX:  626-302-9999
 > Res:  626-914-4641
 >
 >
 > ----------
 > From:  Howard Long[SMTP:howard@howardlong.com]
 > Sent:  Friday, March 10, 2000 5:55 AM
 > To:  Jon Ogden; amsat-bb@AMSAT.Org; kd9kc@elp.rr.com
 > Subject:  Re: [amsat-bb] Help... down to the last two cables.
 >
 > For what it's worth, I went for X rather than + because you can build
remote
 > polarisation switchers between vert, horz, LHCP and RHCP with less coax
 > relays and less loss. There's a very good example of this in both the RSGB
 > Radio Communication Handbook 7th Edition and the RSGB VHF/UHF handbook.
 >
 > Regards, Howard G6LVB
 >
 >
 >


----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org