[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: RE: M2



Ken:
  Was trying to buy M2 with the switcher 2 or 3 years ago when I replaced my
Cushcraft Sat antennas with a KLM system.
  You are getting the same story now as I did then.

73
Joe/W2KQ
----- Original Message -----
From: "Kenneth M. Brockel" <kbrockel@monmouth.com>
To: <K1uxbMa@cs.com>
Cc: <amsat-bb@AMSAT.Org>
Sent: Wednesday, February 23, 2000 7:04 AM
Subject: [amsat-bb] RE: M2


> Nick,
>
> They didn't clue me into what the polarity switching board or relay would
be
> like. He just clarified to me that we were working on it and that they
> wanted to pick up where KLM left off. That guy Wyatt from M2 is there
> marketing guy and he has to justify spending the money to design it. If
> enough people ask for it, I'm sure that M2 will move a little faster. He
> also informed me that that the polarity switching would be a retro-fit
> change. It will involve changing the driven element on each antenna and
> adding the new element assembly. He was hoping for cost somewhere between
> $75 - $100 for assembly.
>
> Hope this helps!
>
> 73, de Ken, N2SMT
>
> -----Original Message-----
> From: K1uxbMa@cs.com [mailto:K1uxbMa@cs.com]
> Sent: Tuesday, February 22, 2000 5:54 PM
> To: kbrockel@monmouth.com
> Subject: Re:M2
>
>
> Ken;
> appreciate the info on M2,I have same setup here but waiting for the Rf
> cabling
> to be delivered then some clear Wx to climb tower.I'm also interested in
> their
> polarity switching board. Wonder what type cable your using on Ants.
>
> Nick_K1uxb@Amsat.Org
> AmSat M#22708  ARRL M#
>
> Save_Time Go_Online
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home