Re: [amsat-bb] Help FT-847 and HEIL ...

[Jon Ogden <jono@xxxxxxxxxxxx>]

on 2/6/00 6:48 PM, Jay Rutherford at w1emt@together.net wrote:

> I found that replacing the 2.2 ohm ones with 10 ohm ones gave me
> better matching between the speaker and phones. One problem
> with this rig is that certain tones (monitor, sidetone) are set only via
> menu, so there will always be an irritating mismatch unless you
> get a reasonable match on the voltage divider on the board.

According to Mike Kruegger of Yaesu, you should remove the resistors
completely.

73,

Jon
KE9NA

-------------------------------------
Jon Ogden
KE9NA

Member:  ARRL, AMSAT, DXCC, NRA

http://www.qsl.net/ke9na

"A life lived in fear is a life half lived."

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org