[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

GSC Update 2.03

Hi Guys,

Chris has released GSC 2.03 which seems to have corrected the Track Box
problem.  It has been tested at a site where the Track Box is being used
and where the problem was experienced.  This version corrected it.  It will
be uploaded to KO-25, UO-22 and the AMSAT ftp site at
ftp://ftp.amsat.org/amsat/software/win32/wisp.  The file will be

Chris has burned some midnight oil getting this update out.

There are a few more items you will find in this version.

Here's the additions list -:

1.  Tx Port: In TNC Setup the item 'Tx Port' has been added.  This is only
used for TNCs with multiple modems such as the Symek TNC3S.  It switches
the the PTT control between the two modems.  In general, this should be set
to 0 for single modem TNCs.  It will only be used when a new version of
MSPE is released in the next couple of weeks.

2.  Rotator Ports: COM1 to COM12 can be used for the rotator port.

3.  DDE Interface:  The current MA number has been added to the end of the

4.  There is an additional item for Satgates on the Satgate Tab of the

5.  The Flip Mode seems to work now.  I just checked it out last night and
went into the flip mode on a pass.  This was not one of the items in Chris'
list of fixes for this version, but it may be fixed now anyway.  Try it

As usual keep your old version until you are satisfied with the performance
of this one.

73, Roy

Internet: w0sl@amsat.org
Home Page: http://home.swbell.net/rdwelch
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org