Re: [amsat-bb] Deviation

[Roy Welch <rdwelch@xxxxxxxxxx>]

Lets all be sure we are talking about the same deviation.  A deviation of
+/- 2.5 kHz from zero deviation is the same as 5 kHz p-p deviation.  I am
using this same deviation and am having excellect results.

Bob Nielsen wrote:
> 
> Brian,
> 
> That is much too high.  For 9600 bps the deviation should be set as
> close as possible to (but not exceeding) 3 kHz.
> 
> Bob, W6SWE
> 
> On Thu, Dec 30, 1999 at 10:51:26PM +1000, Brian Beamish VK4BBS wrote:
> > Hi Chaps
> >
> > Hope the Y2K goes well for all of you.
> >
> > I am interested to know what deviation others are using for working the 9600
> > satellites.
> > I am using a DSP-12 and a IC-275/475 combination currently the deviation on
> > the 275 is just under 5.
> >
> > Would sure like to hear from others.
> >
> > Thanks in advance
> >
> >
> > Regards Brian VK4BBS
> >
> >
> >
> > Maureen and Brian Beamish VK4BBS
> > 29 Adam Street
> > Browns Plains Qld. 4113
> > Australia
> >
> >
> > ----
> > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> 
> --
> Bob Nielsen, W6SWE  (RN2)        nielsen@primenet.com
> Tucson, AZ DM42nh  QRP-L #1985   http://www.primenet.com/~nielsen
> 
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

-- 
73, Roy

Internet: w0sl@amsat.org
Home Page: http://home.swbell.net/rdwelch
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org