[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Phase 3D question



At 09:29 AM 10/27/1999 -0400, Stan wrote:

[some good stuff cut out]

>PHASE II Intermediate satellite station:
>
>1269 Mhz transceiver and antenna capability on same tower. Mast
>mounted preamplifier. Low loss feed line. Alternative is a 1.2 Ghz
>transverter with a 2M multimode transceiver.

P3D is receive only on this freq.  All you need is the ability to transmit.
 A transceiver and preamp are not needed.  This will be a very popular
uplink freq. as one of the two receivers will always be turned on.  Of
course the transceive capablity/preamp are fine if you want to use your
setup for terrestrial use, but it won't help with P3D to be able to receive
1.2 Ghz.

[more good stuff cut out]


-- 
 ________________________________________________________________________ 
 Stacey E. Mills, W4SM    WWW: 	http://www.cstone.net/~w4sm/ham1.html 
   Charlottesville, VA	  PGP key:	http://www.cstone.net/~w4sm/key    	
 ________________________________________________________________________
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home