[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Rotor control software interfacing question

After much searching, I went out and bought a Cushsraft A270-10S 2/70 beam 
antenna and was able to get a Radio Shack type rotor from a neighbor for next 
to nothing (take it down and you can have it!). Was now looking at some of 
the various rotor controll software and they all reference the big az/el 
rotors but was wondering if this simple rotor (az. only) be interfaced for 
semi or full automatic control or is it to simple of a rotor for this to be 

Beam is going to be mounted at 20feet up on a mast bent with a 15degree 
tilt,thanks to local muffler shop pipe bender and $5.00...

73's Jacob Tennant,KB8QIR
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org