Re: [amsat-bb] Icom 821H question

["Malcolm M. Preston" <np2l@xxxxxxxxxxxxxxxx>]

Eric - I think there is a way to accomplish what you want, but I'm a bit
confused from your message.  What do you mean by "It is essential for me to
be able to receive on the subband and transmit on the main band." ?  P16 of
the ICOM manual explains receive and transmit capability in main and sub
band.  It depends whether you have the rig in satellite mode or not.

Mal, NP2L


----- Original Message -----
From: <darnel@volt.ee.uaf.edu>
To: <amsat-bb@AMSAT.Org>
Sent: Thursday, October 21, 1999 8:01 PM
Subject: [amsat-bb] Icom 821H question


> Hi,
>
> I have an Icom 821H and I've just discovered a little "feature" that does
> not seem to be right.
>
> When the rear jack discriminator output is set to the subband, the rig can
> no longer be keyed through the rear connector.
>
> It is essential for me to be able to receive on the subband and transmit
on
> the main band.
>
> If anyone has any insight, I would greatly appreciate it!
>
>    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>   Eric Darnel
>     Electrical Engineering Graduate Student
> University of Alaska, Fairbanks
>   Duckering Building, Room 147
>     Fairbanks, Alaska 99775
>      darnel@volt.ee.uaf.edu
> (907) 474-7139
>      KL0RS
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org