[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: FT-847 and WiSP



I'm using FM.  It doesn't really matter in WiSP unless you are using that
setting to automatically set the radio via the KCT, etc.  The deviation of
the xmtr should be adjusted to be between +/- 2.5-3 kHz.

"Richard J. Lawn" wrote:
> 
> I'm using WiSP with an FT-847 to work the 9600 digi sats. As I have
> mentioned I have been having trouble adjusting the deviation to an adequate
> level. I discovered that in the WiSP Satellite Setup menu, under
> Frequencies, WiSP offers numerous mode options in this setup window. I had
> set mine to FM-N, however, I found that FM and FM-W settings provided the
> deviation figures I was looking for. The 847 manual indicates that the
> Narrow setting is intended for HF operation not VHF/UHF. What should this
> setting be in WiSP and on the 847. I'm controlling rotor and radio via the
> WiSP DDE Client.
> Rick
> 
> Richard J. Lawn
> Meyerson Centennial Professor
> Co-Director, Jazz Studies
> The University of Texas at Austin
> (512) 471-2369 Office
> (512) 471-7764 Music switch board
> fax 512/471-5784
> Web site: http://jazzed.music.utexas.edu
> 
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

-- 
73, Roy

Internet: w0sl@amsat.org
Home Page: http://home.swbell.net/rdwelch
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home