Re: [amsat-bb] Cross boom question

[sam bryant <wc3sam@xxxxxxxxxxxx>]

I have a place to get 1.1/4 fiberglass boom around 6 foot in length name is 
rjd industries
26945 cabot rd #105 
Laguna hills ca 92653 
if you are close to Baltimore I can get them sent to me at work to save on freight but i don't know when we will order from them again or look up number and give them a call and tell them I sent you to get ham cost  73s wc3sam Sam Bryant  
----- Original Message ----- 
From: Michael P. Olbrisch <kd9kc@elp.rr.com>
To: 'Tony/AB2CJ' <ab2cj@nais.com>; <amsat-bb@AMSAT.Org>
Sent: Wednesday, June 30, 1999 7:16 PM
Subject: RE: [amsat-bb] Cross boom question


> 
> 
> > -----Original Message-----
> > From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
> > Behalf Of Tony/AB2CJ
> > Sent: Wednesday, June 30, 1999 10:04 PM
> > To: amsat-bb@AMSAT.Org
> > Subject: [amsat-bb] Cross boom question
> > 
> > 
> > Greetings all
> > 
> > Whats the best  nonmetallic cross-boom material to use for satellite
> > antenna elevation rotors?   I've used a 10 foot PVC pipe reinforced by
> > a wooded pole in the center for years....  it works, but it 
> > isn't as solid 
> > as it should be.
> > 
> > Any suggestions??  
> > 
> > Please reply direct
> 
> No... I (and others I am sure) can always learn from something
> like this.  I will be needing a X-boom myself in the next several
> months.  Sources and ideas are always welcome.
> 
> 
> 
> Vy73,  Mike.   KD9KC    MARS: AAV6EV
> kd9kc@elp.rr.com  -  kd9kc@amsat.org
> Home page: http://www.qsl.net/kd9kc/
> The farthest WEST ham in West Texas.
>  
> Its so dry in El Paso that cows
> are giving evaporated milk !!! 
> 
> 
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org